Savings calculator

What can your building save?

The savings calculator estimates how much heating energy, heating costs and CO₂ room-by-room control can save in your building. It is not an ROI calculator, i.e. not a return calculation: investment costs, funding and payback are not included.

Valve actuator on the existing radiator

Five figures from your bill

Savings calculator

The calculator determines the energy performance indicator, assigns the efficiency class according to Annex 10 and deducts the share of hot water. For the CO₂ calculation it uses the emission factors according to Annex 9. Both annexes come from the Building Energy Act (GEG 2024), the version before the Building Modernisation Act (GModG).

Determines the share used for hot water, which therefore cannot be controlled.

From this, the calculator determines consumption per square metre.

Annual consumption for heating and hot water according to your bill.

Determines the CO₂ factor and the preset price.

The preset value is a guide. Your own value from your bill is more accurate.

FAQ

Frequently asked questions about this page

How much heating energy does individual room control save?

That depends on the initial condition. For buildings in efficiency class H, the calculator assumes up to 30%. In a field test by the Karlsruhe Institute of Technology in three apartment buildings, 15.5% was measured. At the TSV Bicken sports clubhouse, individual room control saves around €1,700 a year.

How does the savings calculator work?

From annual consumption and usable floor area, it determines the energy performance indicator in kWh per m² and assigns the efficiency class according to Annex 10. It deducts the share of hot water for each building type; the CO₂ savings result from the emission factors according to Annex 9. Both annexes come from the 2024 version of the Building Energy Act, before the GModG. The share of hot water and the savings potential per class are empirical values from projects and literature.

Why does the calculator deduct the share of hot water?

Room-by-room control only affects space heating. The energy for hot water stays the same and is therefore deducted before the calculation. How large the share is depends on the building type: in a sports clubhouse with showers it is usually higher than in an administrative building.

Why is no savings potential shown for us?

Your building is in an efficiency class for which we do not assume any potential. At new-build level, control mainly provides evidence and comfort; we do not expect reliable heating cost savings there.

When does individual room control pay for itself?

The calculator only shows the savings; investment costs and funding depend on the building. An example from practice: at the TSV Bicken sports clubhouse, with around 300 m² and 15 valve actuators, the system pays for itself after 1.6 years. We state the investment costs and funding for your building in our quotation.

How accurate is the result?

It is a reasoned estimate based on your consumption data. It becomes more accurate after the on-site survey, once building services, usage times and room occupancy are known. If you request the devices needed, your figures from the calculator are sent to us automatically.