Sensise 8-in-1

Eight components. One contact.

For measuring, alerting and control to work in a building, eight components have to fit together. We supply all eight and remain your contact for the whole system.

The eight components

From the site survey to ongoing operation

The order follows the project sequence. Each component shows who carries it out. We are your contact at every stage, including where a partner or your own staff take on the work. What we are responsible for in detail is set out in the service agreement.

  1. 01

    Consulting

    We visit the building, count radiators and rooms and clarify funding with Enerfect. From this we calculate the device list and the price.

    Carried out bySensise

  2. 02

    End devices

    Sensors, valve actuators, actuators, meters and contacts, selected according to the application regardless of manufacturer. A large share of the sensors comes from the Thermokon group's production in Mittenaar. Every device is tested before shipping and set up in your instance, your own area of the platform.

    Carried out bySensise

  3. 03

    Gateways

    The receiver in the building, connected via mobile network or the building network. One gateway usually covers an entire property. Existing gateways remain usable because LoRaWAN® is an open radio standard for low-energy sensors.

    Carried out bySensise

  4. 04

    Installation

    Before the quotation, our installation network measures the coverage in the property and plans gateways and antennas, also for self-installation on request. Installation is carried out by our installation network or your own staff. For self-installation, all devices are assigned to their room and the platform in advance.

    Carried out byInstallation networkSelf-installation

  5. 05

    Network server

    Manages the connections between end devices and gateways and runs at The Things Industries in a data centre in the Frankfurt area. You do not need to set anything up. On request we connect an existing network server of your own.

    Carried out bySensise

  6. 06

    Application server

    Translates the devices' data packets into measured values and stores the time series in compliance with the GDPR in the Frankfurt area. The data is encrypted in transit and at rest. Test and production environments are separate.

    Carried out bySensise

  7. 07

    Platform

    Analysis, monitoring and control run in the browser, no installation is needed. An existing building management system (BMS) or CAFM software for facility management receives the same data. Data is transferred as a CSV file or continuously via the MQTT and REST API interfaces, without an additional contract. The Sensise platform is not a must: if you already work with a leading platform, such as a building management system, a CAFM or an energy management system, we pass the data to it and your team stays in the interface it knows.

    Carried out bySensiseThird-party platform

  8. 08

    Support

    Three-tier and based in Germany: application questions, technology and development. You have a dedicated contact with us, and response times are set out in the service agreement.

    Carried out bySensise

What is missing in your building?

A thirty-minute initial consultation clarifies which of the eight components you already have. The more of them are in place, the smaller the project.

Frequently asked questions

Frequently asked questions about 8-in-1

What does Sensise 8-in-1 mean?

A connected building needs eight components: consulting, end devices, gateways, installation, network server, application server, platform and support. Sensise supplies all eight from a single source and remains your contact for the whole system, even when a partner company or your own staff do the installation. The handovers between sensor manufacturer, network operator, software company and electrical contractor are no longer needed.

Do we have to order all eight components from Sensise?

No. What is already there stays: your installation company or facility team does the installation, existing LoRaWAN gateways and your own network server can be connected, and an existing platform receives the data. The more components are already in place, the smaller the project.

Do we have to use the Sensise platform?

No. If you already work with a building management system, a CAFM or an energy management system, we pass the data to it, as a CSV file or continuously via MQTT and the REST API, without an additional contract. Your team stays in the interface it knows.

How long does a project take from site survey to operation?

At the TSV Bicken sports clubhouse, two weeks passed from the site survey to ongoing operation. The installation itself usually takes half a day to a full day: 42 valve actuators at the Catholic parish of Herborn were installed in half a day. This is possible because every device is tested before shipping and assigned to a room in your instance.

Who do we call if something does not work?

You have a dedicated contact at Sensise, one number and one address. Support is three-tier and based in Germany: application questions, technology and development. Whether the cause lies with the device, the gateway or the platform, we sort it out internally. Response times are set out in the service agreement.

What happens if a device fails?

The platform reports a device that stops sending data, often before anyone in the building notices, and warns of low battery. Replacement is handled under the service agreement, and the device history is retained.

Where do the devices come from?

A large share of the sensors comes from the production of the Thermokon group in Mittenaar, to which Sensise belongs. The selection is manufacturer-independent and based on the application. Spare parts and follow-up deliveries are secured for the long term.